The MS600S portable six-in-one gas detector is primarily used for the rapid and accurate detection of gas leaks or for alarming when gas concentrations exceed safe levels. It features a front-end digital sensor that can be replaced without disassembling the device. Each digital sensor is plug-and-play and intelligently recognized, allowing for the simultaneous configuration of multiple single digital sensors for the detection of a wider range of gases. The main gas detection principles employed include: electrochemical, infrared, catalytic combustion, thermal conductivity, and PID photoionization.

The MAS-110 is a highly efficient porous inhalation sampler with a flow rate of 100 LPM and an impact velocity of 11 m/s, which meets the requirements of Anderson Impact Level 5, ultimately ensuring that all microbial particles larger than 1um in the environment are collected. The instrument is equipped with a 5-inch touch screen, which is very user-friendly, efficient and quick to operate, and can be equipped with a Bluetooth printer, which greatly improves the user experience. The housing design adopts professional industrial design scheme, and the whole body is made of aluminum alloy, which is high-end and elegant.
It is a high end and stylish instrument. The instrument is widely used in pharmaceutical research and development, biological laboratories, medical laboratories and other clean scenes.

The nitrogen purity analyzer uses an electrochemical and ion flow oxygen sensor to measure the oxygen content in a gas and calculates the concentration of another gas besides oxygen by back-calculating the percentage. This instrument is widely used in industries such as steel, air separation, and nitrogen generators.

The FN104T dew point meter utilizes an imported thin-film capacitive humidity sensor, combined with single-chip microcomputer control technology, offering high measurement accuracy and ease of use.

The instrument features a 320×480-dot TFT display that simultaneously displays dew point temperature, volume ratio, and absolute humidity. When unattended, it can periodically record dew point values and store at least three months of continuous data. The touchscreen menu is user-friendly and user-friendly, with a fully Chinese menu. It operates with a 220V AC charger, AC power supply, and DC battery power, providing approximately 8–12 hours of continuous operation on a full charge.

The LD-H2/ LD -PH2 type hydrogen detector is equipped with a high-performance hydrogen sensor.instrument, It has a fast response speed, Wide dynamic response range Features include high measurement accuracy . The detector adopts a low-power design. It boasts a long battery life and can adapt to complex operating conditions in various hydrogen-related scenarios. To enable rapid detection of hydrogen leaks , The products have been widely used in hydrogen fuel cell vehicles, Hydrogen supply station Applications include hydrogen production, storage, and transportation.

The HY001-IR/UV Flame Simulator is designed for testing flame detectors of the following types:
UV (Ultraviolet)
IR (Single-band Infrared)
IR2 (Dual-band Infrared)
IR3 (Triple-band Infrared)
IR/UV (Infrared/Ultraviolet Combined)
It allows users to test flame detectors in environments where open flames cannot be used.
Different manufacturers of infrared flame detectors have different detection frequencies.
This product is suitable for infrared flame detectors with a frequency of 0 - 10Hz.

TA-3.5 Total Organic Carbon (TOC) Analyzer is an instrument specially used for online detection of total organic carbon in deionized water such as purified water, water for injection, and ultrapure water. The instrument can be controlled by the machine itself or by software installed on the computer, and can perform data analysis and processing. It has more complete functions, rich display content, convenient data query, and simple operation.

MIC300OZ OZONE DETECTOR is a microprocessor-based dual beam photometer(UV 254 nm) for measuring the ozone content in air or oxygen.
To evaluate the ozone content in the sample gas the MIC300-O OZONE DETECTOR measures the UV radiation in the measurement channel, the UV radiation in the reference channel, the temperature and the pressure in the cuvette.

Ozone generator manufacturers, municipal water industry, industrial wastewater industry, fine chemical industry, food and drinking water industry, space disinfection industry, pool disinfection industry, flavor synthesis industry and other industries using ozone generator.

The OZ-180W dissolved ozone water concentration analyzer directly measures the ozone content in ultrapure water or water with constant turbidity using ultraviolet photometry. A customizable version, the OZ-180W-HF, is available for 20% hydrofluoric acid ozone solutions. Materials in contact with the ozone water include PTFE, FFPM, PFA, and quartz or sapphire. The OZ-180W dissolved ozone water concentration analyzer features inlet and outlet ports and a touchscreen interface. It provides 4-20mA and RS-485 signal outputs for direct connection to a PLC.
The OZ-180W dissolved ozone water concentration analyzer features an automatic UV light source adjustment system. It adjusts the brightness of the UV LED light source in real time based on reference light data to maintain a constant zero point, ensuring zero point stability. This is a patented product of our company. This ozone analyzer can operate continuously 24 hours a day. The superior stability of this ozone concentration analyzer is