Zetron Instrument focuses on providing customized solutions for precision analysis and monitoring.
PTM600-AQI5 Portable 5 in 1 Gas Detector
PTM600-AQI5 portable gas detector has the function of measuring multi gases, temperature and humidity. We can support OEM/ODM sevice.
PTM600-AQI5 Portable 5 in 1 Gas Detector
PTM600-AQI5 portable gas detector can be selected to detect 1~8 factors (including gas concentration, temperature and humidity, particulate matter, differential pressure, wind speed, etc.) simultaneously.
Feature:
* Up to 30 kinds of factors can be detected at the same time; the specific detection type depends on the internal sensor configuration of the instrument
* Units are freely switchable, units can be selected: ppm, mg/m3, ug/m3, VOL%, LEL%, pphm, ppb, mg/L.
* Built-in pump suction measurement, sampling distance greater than 10 meters; support real-time detection or timed detection (turn off the air pump when not detecting)
* Rich man-machine interface: 3.5-inch high-definition color screen display, the menu interface uses high-definition simulation graphics to display the function name of each menu.
* A variety of alarm modes alarm mode setting, alarm status indication in multiple directions when the alarm:
→ Alarm mode: sound and light alarm, visual alarm, sound and light + visual alarm.
→ Alarm types: concentration alarm, undervoltage alarm, fault alarm
→ Alarm mode: low alarm, high alarm, interval alarm, weighted average alarm
* Misoperation identification function Concentration calibration misoperation is automatically identified and stopped, which can avoid the bad caused by human factors.
* Protection level up to IP66 splash-proof, dust-proof, explosion-proof, shock-proof
Tag: Air Qquality Monitoring System、Handheld Indoor Gas Monitor、 Gas Concentration Temp & Humidity System、High Precision Air Quality Monitor、OEM/ODM Device
|
Gases to be detected
|
NO, NO2, CO, CO2, O2
|
||||
|
Resolution
|
0.001 PPM(0-1 PPM);0.01 PPM or 0.001 PPM(0~10 PPM);1 PPM or 0.1 PPM(0~1000 PPM);
1 PPM(0~1000 PPM);0.01mg/L(0~200%mg/L);0.1%LEL(0-100%LEL) other resolution can be customized |
||||
|
Detection principle
|
PID photoionization Depending on the type of gas, range, field environment and user demand, can be customized.
|
||||
|
Allowable error
|
≤±2% F.S (other or higher precision levels can be customized)
|
||||
|
Working environment
|
Temperature: -40 ℃ ~ + 70 ℃
Humidity: ≤10 ~ 95% RH
|
||||
|
Power supply
|
3.6VDC, 10000mA high capacity rechargeable polymer battery
|
||||
|
Detection mode
|
Built-in pump-suction type measurementFlow rate at 800 ml / min
|
||||
|
Alarm mode
|
Sound & light alarm, vibration alarm, turning off the alarm.
|
||||
|
Protection level
|
IP66
|
||||
|
Exterior dimensions
|
230×210×120 mm (L×H×W)
|
||||
|
Weight
|
2.5Kg
|
||||
Petroleum, chemical, pharmaceutical, environmental protection, gas distribution, flue gas analysis, air treatment and all other occasions that need to detect and analyze gas concentration.
Office 19B, 17th Floor, Building 1, 48 Dongzhimenwai Avenue, Dongcheng District, Beijing