Zetron Instrument focuses on providing customized solutions for precision analysis and monitoring.
MS500-2 4 In 1 Handheld Gas Detector
MS500 gas detector is used for portable and rapid detection of toxic and hazardous gas concentration, temperature and humidity measurement and alarm.
MS500-2 Portable 4 in 1 gas detector
MS500-2 gas detector is used for portable and rapid detection of toxic and hazardous gas concentration, temperature and humidity measurement and alarm. The MS500 can detect gas concentrations in pipelines or confined spaces, atmospheric environments, gas leaks or various background gases such as ammonia or oxygen with high concentrations of single gas purity, and more than 500 types of gases.
| Gases to be detected | Range | Minimum reading | Response time T90 |
| Combustible gas ( EX ) | 0-100%LEL | 0.1%LEL | ≤10 seconds |
| Methane ( CH4 ) | 0-100%LEL | 0.1%LEL | ≤10 seconds |
| Oxygen gas ( O2 ) | 0-30%Vol | 0.01%Vol | ≤10 seconds |
| Carbon monoxide ( CO ) | 0-100ppm | 0.1ppm | ≤25 seconds |
| Hydrogen sulfide ( H2S ) | 0-10ppm | 0.001ppm | ≤30 seconds |
| Sulfur dioxide ( SO2 ) | 0-10ppm | 0.001ppm | ≤30 seconds |
| Nitric oxide ( NO ) | 0-10ppm | 0.001ppm | ≤30 seconds |
|
TotalVolatileOrganic Compound gases ( TVOC ) |
0-10ppm | 0.001ppm | ≤30 seconds |
Tag: Pump gas monitor, Four in one gas detector , Handheld gas leak detector, Gas alarm detector, Toxic and harmful gas analyzer, Carbon monoxide detector, Methane leak monitor, Portable gas alarm, OEM/ODM gas detector
|
Gases to be detected
|
CO/EX/H2S/O2
|
||||
|
Detection range
|
O2:0-30%VOL,CO:0-100ppm, H2S:0-100ppm,EX:0-100%LEL
and other ranges can be customized. |
||||
|
Resolution
|
O2:0.01%VOL, CO:0.1ppm, H2S:0.01ppm,EX:1%LEL
|
||||
|
Allowable error
|
≤±2% F.S (other or higher precision levels can be customized)
|
||||
|
Linearity
|
≤±2%
|
Repeatability
|
≤±2%
|
Uncertainty
|
|
|
Working environment
|
Temperature: -40 ℃ ~ + 70 ℃, humidity: ≤10 ~ 95% RH, and built-in filters can be used in high humidity or high dust environment.
|
||||
|
Power supply
|
3.6VDC, 5500mA high capacity rechargeable polymer battery
|
||||
|
Detection mode
|
Built-in pump-suction type measurement, and flow rate at 500 ml / min. Calibration flow rate should be greater than 500 ml / min,
three-way pipe should be connected, so as to ensure that the excessive gas will be discharged from the bypass |
||||
|
Alarm mode
|
It is possible to set as sound & light alarm, vibration alarm, sound & light + vibration alarm, Turning off the alarm.
|
||||
|
Data storage
|
Standard configuration is the data storage capacity for 100, 000 entries
|
||||
|
Protection level
|
IP66
|
||||
|
Explosion-proof mark
|
Exia II CT6
|
||||
|
Exterior dimensions
|
180×78×33mm (L×W×H)
|
||||
|
Weight
|
350g
|
||||
|
Standard accessories
|
Manual, qualification certificate, warranty card, USB charger (including the data cable), high-grade aluminum instrument case,
belt clip, humidity dust filter |
||||
Application scenarios
All the cases which requires the portable rapid detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on.
Sorry There is no "Application", you can view other services。
Office 19B, 17th Floor, Building 1, 48 Dongzhimenwai Avenue, Dongcheng District, Beijing