PTM600 portable gas analyzer combine with world famous brand sensor, could test 18 gases at the most, with pressure sensor, temperature and humidity sensor, works with different temperature sampling probes, could fastly acquire and analyze gas concentration components in scientific research, university and chemitry, environment and flue gas. Support OEM and ODM service.
PTM600 Portable Multi-Gas Analyzer
PTM600 Portable Multi-Gas Analyzer with world famous brand sensor, could test 18 gases at the most, with pressure sensor, temperature and humidity sensor, works with different temperature sampling probes, could fastly acquire and analyze gas concentration components in scientific research, university and chemitry, environment and flue gas.
Gases to be detected | Range | Minimum reading | Response time T90 |
Combustible gas ( EX ) | 0-100%LEL | 0.1%LEL | ≤10 seconds |
Methane ( CH4 ) | 0-100%LEL | 0.1%LEL | ≤10 seconds |
Oxygen gas ( O2 ) | 0-30%Vol | 0.01%Vol | ≤10 seconds |
Carbon monoxide ( CO ) | 0-100ppm | 0.1ppm | ≤25 seconds |
Carbon dioxide ( CO2 ) | 0-500ppm | 1ppm | ≤20 seconds |
Ozone ( O3 ) | 0-1ppm | 0.001ppm | ≤20 seconds |
Hydrogen sulfide ( H2S ) | 0-10ppm | 0.001ppm | ≤30 seconds |
Sulfur dioxide ( SO2 ) | 0-10ppm | 0.001ppm | ≤30 seconds |
Nitric oxide ( NO ) | 0-10ppm | 0.001ppm | ≤30 seconds |
TotalVolatileOrganic Compound gases ( TVOC ) |
0-10ppm | 0.001ppm | ≤30 seconds |
Volatile gases ( PID ) | 0-10ppm | 0.001ppm | ≤30 seconds |
Tag: Pump gas monitor, Six in one gas detector , Nitric oxide leak detector, Gas alarm detector, Hydrogen gas analyzer, Carbon monoxide detector, Methane leak monitor, OEM/ODM gas detector
Gases | Combination of 1 ~ 6 types of gases which can be expanded to 18 or more types of gases, such as toxic gases, oxygen gas, carbon dioxide, inflammable and explosive gases, TVOC, and so on. | ||||
Application scenarios | All the cases which requires the portable rapid detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on. | ||||
Detection range |
0 ~ 1, 10, 100, 1000, 5000, 50000, 100000ppm, 0 ~ 200 mg/L, 0 ~ 100%LEL, 0 ~ 20%, 50%, 100%Vol, can be selected; and other ranges can be customized. |
||||
Resolution | 0.01ppm or 0.001ppm (0 ~ 10 ppm); | ||||
0.01ppm (0 ~ 100 ppm), | |||||
0.1ppm (0 ~ 1000 ppm), | |||||
1ppm (0 ~ 10000 ppm or more), | |||||
0.01 mg/l (0 ~ 200 mg/l), | |||||
0.1% LEL, | |||||
0.01%LEL | |||||
0.001% Vol | |||||
Detection principle |
Electrochemical, catalytic combustion, infrared, thermal conductivity, PID photoionization, Laser or others, depending on the type of gas, range, field environment and user demand. |
||||
Accurancy | ≤±2% F.S (other or higher precision levels can be customized) | ||||
Linearity | ≤±2% | Repeatability | ≤±2% | Uncertainty | ≤±2% |
Response time | T90≤20 seconds | Recovery time | ≤30 seconds | ||
Working environment |
Temperature: -40 ℃ ~ + 70 ℃ humidity: ≤10 ~ 95% RH and built-in filters can be used in high humidity or high dust environment. |
||||
Sample gas temperature |
-40 ℃ ~ + 70 ℃ the optional configuration of high-temperature sampling and cooling filter handle will be possible to detect the smoke gas at the temperature of 1300 ℃. |
||||
Power supply | 3.6VDC, 10000mA high capacity rechargeable polymer battery | ||||
Detection mode | Built-in pumped type with 800 ml / min flow rate | ||||
Alarm mode | sound & light and vibration alarm | ||||
Communication interface | USB (charging and communication), optional: RS232, infrared communication, automatic recognition | ||||
Data storage | Standard configuration is the data storage capacity for 100, 000 entries; SD card storage and USB disk storage functions are optional configuration. | ||||
Protection level | IP66 | ||||
Explosion-proof type | Intrinsically safe type | ||||
Explosion-proof mark | Exia II CT6 | ||||
Exterior dimensions | 230×210×120 mm (L×H×W) | ||||
Weight | 2.5Kg | ||||
Standard accessories | Manual, qualification certificate, warranty card, USB charger (including the data cable), aluminum carrying case | ||||
Built-in humidity dust filter, 0.4 meter stainless steel sampling handle (1 meter of hose, with dust filter, not retractable) | |||||
Optional items |
1.2 m retractable sampling handle |
||||
High temperature sampling and cooling filter handle, high temperature humidity pretreatment system | |||||
External mini wireless infrared printer or built-in mini printer | |||||
SD card storage, USB disk storage, wireless data communications. |
All the cases which requires the portable rapid detection of gas concentrations such as petroleum, chemical, pharmaceutical, environmental protection, combustion gas distribution, warehousing, smoke gas analysis, air governance, and so on.
It is suitable for detecting the concentrations of gases in the atmosphere environment in the pipeline or confined space; and the purity of the gas leakage and various high concentration single gases with the background gas as nitrogen gas or oxygen gas.