loading

 Zetron Instrument provides precision analysis and monitoring solutions, with a strong focus on pharmaceutical manufacturing, sterility assurance, contamination control and quality monitoring.


B330-S Surface Deposited Particle Counter 1
B330-S Surface Deposited Particle Counter 1

B330-S Surface Deposited Particle Counter

Surface particle counting
Measure deposited particles and airborne particles
CLEANROOMS CONTROLLED PRODUCTION
5.0
design customization

    oops...!

    no product data.

    Go to homepage

    B330-S Surface Deposited Particle Counter

    Check surface cleanliness and airborne particle levels with one counter

    B330-S Surface Deposited Particle Counter 2
    28.3
    L/min SAMPLE FLOW
    B330-S Surface Deposited Particle Counter 3
    6
    SIZE CHANNELS
    啊
    50
    mm PROBE DIAMETER
    11111
    6 h
    BATTERY LIFE
    图片2 (31)

    Count particles on surfaces and in air

    The B330-S uses single-particle laser light scattering to count and size particles. Switch probes to check deposited particles on work surfaces or airborne particles in controlled environments.

    28.3 L/min

    Controlled sampling flow

    An active pump and closed-loop flow control maintain a steady sample flow. A built-in filter supports self-cleaning between tests.

    B330-S Surface Deposited Particle Counter 7
    01
    Six particle size channels
    Measure at 0.3, 0.5, 1.0, 3.0, 5.0 and 10.0 µm. Choose which channels appear on the 8-inch color touchscreen.
    B330-S Surface Deposited Particle Counter 8
    02
    Programmable sampling
    Set the sampling location, duration, cycle count and interval. Audible and visual alarms can use class or channel thresholds.
    图片1 (29)
    03
    Local records and printing
    Store up to 7 million records and export CSV files via USB Type-C. Print results manually or after each cumulative cycle.
    787
    04
    Connect to monitoring systems
    USB, RS485 and Ethernet support data acquisition. Modbus RTU/TCP is available, with optional 4G, Wi-Fi or LoRa.

    Two ways to sample particles

    Use the handheld surface probe for deposited particles or the isokinetic inlet for airborne measurements. Each mode reports results in its own units.

    Surface deposited particles

    50 mm surface probe

    图片3 (28)

    Hold the probe against or just above the target. Air from the probe lifts deposited particles into the sample stream. Set the probe area before sampling.


    RESULT UNITS

    Total count or particles per m², cm², mm², ft² or in². Supports SCP surface cleanliness classes.


    Airborne particles

    Isokinetic sampling inlet

    图片4 (22)

    Fit the isokinetic inlet to the stand and connect it to the sample inlet. The counter draws air at 28.3 L/min.

    RESULT UNITS

    Total count or particles per m³ or ft³. Supports ISO air cleanliness classification.


    Included: both sampling heads, sampling stand, two sampling tubes and a transport case.

    Where to use it

    B330-S Surface Deposited Particle Counter 13
    01
    Semiconductor and electronics
    Check work surfaces and airborne particles in controlled production areas.
    B330-S Surface Deposited Particle Counter 14
    02
    Pharmaceutical cleanrooms
    Check particle levels in cleanrooms and on selected work surfaces.
    图片1 (29)
    03
    Precision and food production
    Assess work areas where deposited particles can affect product quality.

    Technical specifications

    B330-S  |  Surface Deposited Particle Counter

    Parameter Specification
    Measurement principle Single-particle laser light scattering
    Laser source Long-life laser diode
    Particle size channels 0.3, 0.5, 1.0, 3.0, 5.0 and 10.0 µm
    Sampling flow 28.3 L/min
    Counting efficiency 50% at 0.3 µm; 100% above 0.45 µm (ISO 21501-4)
    Max. airborne concentration 1,000,000 particles/ft³
    Self-cleaning time ≤10 min (three consecutive zero counts)
    Sampling program 1–999 cycles; 1–60,000 s sampling time
    Surface probe 50 mm diameter; custom sizes available
    Display and printer 8-inch color touchscreen; built-in thermal printer
    Data storage and export 7 million records; CSV export via USB Type-C
    Wired interfaces and protocol USB, RS485, Ethernet; Modbus RTU/TCP
    Optional wireless 4G, Wi-Fi or LoRa
    Power adapter Input: 100–240 V AC, 50/60 Hz, 2.5 A
    Output: 16.8 V DC, 5 A
    Battery life / operating power 6 h / 35 W
    Operating environment −20 to 60 °C; 20–95% RH, non-condensing
    Main unit dimensions / weight 240 × 295 × 285 mm / 7 kg

    Reference standards: ISO 14644-9:2022 (surface) and ISO 14644-1:2015 (airborne).

    Contact us
    Get in touch with us
    Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!
    Related Products
    +86 15699785629
    Operating hours
    Monday - Saturday(GMT+8): 8am - 8pm

    Zetron delivers innovative solutions that boost efficiency and drive growth for your business success.

    Contact with us
    Contact person: Lisa Niu
    WhatsApp:+86 15699785629
    Add:

    Office 19B, 17th Floor, Building 1, 48 Dongzhimenwai Avenue, Dongcheng District, Beijing

    Copyright © 2026 Zetron - www.bjzetron.com | Sitemap  | Privacy Policy
    Contact us
    wechat
    phone
    email
    whatsapp
    Contact customer service
    Contact us
    wechat
    phone
    email
    whatsapp
    cancel
    Customer service