Zetron Instrument focuses on providing customized solutions for precision analysis and monitoring.

TA-2.6 CARBONANALYZER TOTAL ORGANIC

0.001 mg/L detection limit
6 min analysis
TOC+conductivity

Inquiry

Write a Review

Compact • Portable • Reagent-Free

Precision for High-Purity Water

TA-2.6 oxidizes organic compounds by UV/TiO₂, measures carbon dioxide through conductivity, and calculates TOC from independently measured TC and TIC.

0.001 mg/L

Detection limit

0.001–1.600

Measurement range (mg/L)

6 min

Analysis time

Designed for deionized water below 1.600 mg/L TOC

UV Oxidation + Dual Conductivity

The sample is split into two equal-flow paths.

TIC is measured before oxidation; TC is measured after UV/TiO₂ oxidation.

Built for Routine TOC Control

Reagent-Free

No acid, oxidant or carrier gas is required.

Dual-Channel Detection

Independent TIC and TC conductivity channels with temperature compensation.

TOC + Conductivity

Reports sample conductivity together with TOC results.

Compact & Portable

Lightweight, energy-efficient design for flexible placement.

High-Limit Alarm

Configurable upper-limit alarm supports fast exception response.

System Suitability

Supports USP <643>, EP <2.2.44> and the 2020 Chinese Pharmacopoeia TOC method.

Traceable Data, Direct Operation

One touchscreen. Four core tasks.

Access Levels

Administrator • Operator • User

12 mo

Continuous Data

Search, print and review stored records

USB

Export

Audit trail and history records

PDF

Reports

Export or print completed results

Audit trail records operations, timestamps, users, calibration and maintenance history.

Designed for Critical Water Systems

From Sample to Traceable Record

The instrument runs the measurement sequence automatically after sample information is entered.

Connect sample

Prepare at least 300 mL and connect inlet / outlet tubing.

Enter information

Product name, product code and sampling point.

Start analysis

The automated sequence requires no manual control.

Monitor results

Review real-time TOC and conductivity.

Save automatically

Completed results are stored in History.

Print or export

Print directly or export stored records as PDF.

Flush the lines before testing when the instrument has been idle or after a high-TOC sample.

Technical Specifications

All values below are taken directly from the TA-2.6 user manual.

Parameter	Specification
Power supply	220 V ± 22 V AC
Power frequency	50 Hz ± 1 Hz
Rated power	100 W
Detection limit	0.001 mg/L
Measurement accuracy	±4%
Measurement range	0.001–1.600 mg/L
Analysis time	6 min
Response time	≤15 min
Sample temperature	1–70 °C
Ambient temperature	10–40 °C; daily change within ±5 °C
Relative humidity	≤85% RH
Repeatability error	≤3%

Installation & Routine Maintenance

Installation conditions

Parameter	Requirement
Supply voltage	220 V ± 22 V AC
Power frequency	50 Hz ± 1 Hz
Ambient temperature	10–40 °C
Relative humidity	≤85% RH
Sample temperature	1–70 °C
Ventilation clearance	≥16 cm behind and on both sides

Recommended consumable replacement

Part No.	Component	Interval*
19058Z	UV lamp	6 months
10062Z	Peristaltic pump tubing	12 months

Sample handling

Use a filter of 60 µm or finer when visible insoluble particles are present.

Keep the instrument on a clean, level and stable surface.

TA-2.6TOTAL ORGANIC CARBONANALYZER

CONTROL ORGANIC

CARBON WITH CONFIDENCE

TA-2.6 combines reagent-free UV oxidation, dual conductivity detection and traceable data management in one compact analyzer.

Get in touch with us

Just leave your email or phone number in the contact form so we can send you a free quote for our wide range of designs!